3-Tank Outdoor Ultra-Modular IBC SpillPallet
Spill 911 Part Number: UT-1166-0001
Manufacturer Part Number: 1166
Weight: 1450.00 pounds
New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models.
Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H.
To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks.
Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations.
Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils.
Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management.
You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units.
|3 pallets with 2 expansion tanks|
|188" L x 93" W x 79" H|
|27,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 355 gal. Sump Capacity - 1,258 lbs.|
Customer Ratings & Reviews
Be the first to rate this item!