Search results for "adjustable-leg-bench":

Manufacturer: Pucel, Manufacturer Part Number: ABL-22 Legs adjust from 32–1/2" to 37–1/2" on 1" centers. Holes are provided for attachment of bench top, shelf, and stringer. Steel floor pads have holes for anchoring the adjustable bench legs to the floor. Adjustable workbench legs are constructed of 12-gauge steel. Receptacle punch–out available. Sold individually.

Manufacturer: Pucel, Manufacturer Part Number: ABL-28Legs adjust from 32–1/2" to 37–1/2" on 1" centers. Holes are provided for attachment of bench top, shelf, and stringer. Steel floor pads have holes for anchoring to floor. Constructed of 12 gauge steel. Receptacle punch–out available.

Manufacturer: Pucel, Manufacturer Part Number: ABL-46Legs adjust from 32–1/2" to 37–1/2" on 1" centers. Holes are provided for attachment of bench top, shelf, and stringer. Steel floor pads have holes for anchoring to floor. Constructed of 12 gauge steel. Receptacle punch–out available.

Manufacturer: Pucel, Manufacturer Part Number: ABL-58Legs adjust from 32–1/2" to 37–1/2" on 1" centers. Holes are provided for attachment of bench top, shelf, and stringer. Steel floor pads have holes for anchoring to floor. Constructed of 12 gauge steel. Receptacle punch–out available.

Manufacturer: Pucel, Manufacturer Part Number: ABL-34Legs adjust from 32–1/2" to 37–1/2" on 1" centers. Holes are provided for attachment of bench top, shelf, and stringer. Steel floor pads have holes for anchoring to floor. Constructed of 12 gauge steel. Receptacle punch–out available.

Manufacturer: Vestil, Manufacturer Part Number: LAW-3636Platform Size (W x L): 36" x 36", Service Range: 30" to 45", Capacity: 500 lbs., Overall Frame Size (W x L): 36" x 36" – Linear Actuated Adjustable–Height Work Bench – Increase productivity by allowing the body to reposition to a more comfortable position. The Linear Actuated Adjustable–Height Table allows anyone, regardless of their height, to easily use the table as a workstation or desk. Cantilever design optimizes foot, knee, and leg room. The 36" wide x 36" deep platform is large enough for small parts assembly and will hold up to 500 pounds evenly distributed. A hand–held raise and lower control is attached to the understructure of the table; no more misplacing the remote. Durable hardwood platform standard.

Manufacturer: Vestil, Manufacturer Part Number: EWB-7236Platform Size (W x L):72" x 36", Service Range: 32" to 46", Capacity: 750 lbs. – Manual Adjustable Ergonomic Work Benches – Raise material to an ergonomic working height with the Manual Adjustable Ergonomic Work Bench. A fold away hand crank is located directly under the platform for easy raising and lowering. Hydraulic system will raise platform evenly. Rugged steel understructure.

Manufacturer: Little Giant, Manufacturer Part Number: WW-3036-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 36". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3660-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WST2-2448-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-3072-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 30" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-3060-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 30" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WSS2-3048-AHCombine the strength of a welded steel table with corrosion resistance of Stainless Steel! 16 gauge Type 304 Stainless Steel with a #4 finish is applied securely to the 12 gauge steel top. The lower shelf and remaining components have a durable gray powder coat finish. The stainless steel surface provides superior chemical, corrosion, and rust resistance without sacrificing overall strength. Adjustable legs range from 27" – 41" High in 2" Increments. Dimensions: 30" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WSJ2-3072-AHButcher Block top is 1–3/4" thick, helps deaden sound, absorbs impact. Replaceable top is attached to an all–welded steel frame. Half lower shelf constructed of 12 gauge steel with 3" high lip at rear. Adjustable height legs range from 28–3/4" to 42–3/4" High in 2" increments. All–welded units ship fully assembled and ready for immediate use. Dimensions: 30" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: WSJ2-3060-AHButcher Block top is 1–3/4" thick, helps deaden sound, absorbs impact. Replaceable top is attached to an all–welded steel frame. Half lower shelf constructed of 12 gauge steel with 3" high lip at rear. Adjustable height legs range from 28–3/4" to 42–3/4" High in 2" increments. All–welded units ship fully assembled and ready for immediate use. Dimensions: 30" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WSH1-3672-AH1/4" Hardboard surface attached directly over 12 gauge steel top. Hard–board will help to deaden the sound of heavy blows and metal to metal contact. Hardboard is a more “forgiving" surface than steel and will help protect parts. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: WW3672-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 72". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 60". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW-3660-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 60". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3672-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 36" x 72".