Clamp+Go Dolly Handle
Spill 911 Part Number: MO-0024-0001
Manufacturer Part Number: 24
Reduce risks to workers with the ergonomic and safety conscious Morse Clamp+Go TM Dolly Handle. Attach Clamp+Go TM to the sidewall of your drum dolly with a downward push to engage the quick–coupling mechanism. Then pull or push to move your drum around. Easily move into and out of confined areas.
Increase worker safety by moving drum dollies with the Clamp+Go TM. Don't risk catching your fingers between the drum and other objects. Your drum is far more stable because you apply even force below the drum's center of gravity.
For safety reasons, use caution to maintain control and avoid tipping when pushing at the top of your drum to move a drum dolly. Lateral force at the top of the drum shifts over 70% of the weight to the front dolly wheels. This can make the dolly difficult to control, and potentially hazardous without warning – even topple over, especially if the dolly wheels hit an obstruction, a hole in the floor, or while descending a slope.
Decrease the risk of this happening by attaching the Clamp+Go TM to the drum dolly. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping.
The Clamp+Go TM can be used with round drum dollies of various sizes. Move the quick–pin to adjust for 2", 2.5" or 3" tall dolly sidewall. One Clamp+Go TM works with all Morse round drum dollies, and with many other brands.
Use your steel–toe boot to disengage the Clamp+Go TM from your dolly. . then quickly connect to another. Always comply with the maximum capacity of the drum dolly being handled.
For convenient storage, push the Clamp+Go TM handle to upright position, and a magnet holds it in place.
> > Watch the video < <
|46" x 11" x 6" - 11 lbs.|
Customer Ratings & Reviews
Be the first to rate this item!