Drench and Combination Showers

Manufacturer: Bradley, Manufacturer Part Number: S19-324D2DClass I, Division 2, Groups B, C and D, Explosion Proof. Wall or Fixture Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4 Rated. For Use With Drench Showers or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324D2DHTClass I, Division 2, Groups B, C and D, Explosion Proof. Heat Trace Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Showers or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324DGWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Silence Switch with Automatic Reset and Green Beacon Light Included. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324DGWWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Silence Switch with Automatic Reset, Green Beacon Light, and White Area Light Included. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed

Manufacturer: Bradley, Manufacturer Part Number: S19-110SSFREE STANDING DRENCH SHOWER, ALL STAINLESS STEEL, 1 1/4" NPT WATER SUPPLY ALL STAINLESS FOR HIGHLY CORROSIVE ENVIRONMENTS, STAY OPEN VALVES, SHOWER HEAD W/ 20 GPM FLOW CONTROL CONSERVES WATER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19-120SSHORIZONTAL DRENCH SHOWER, ALL STAINLESS STEEL, 1" NPT WATER SUPPLY ALL STAINLESS FOR HIGHLY CORROSIVE ENVIRONMENTS, STAY OPEN VALVES, SHOWER HEAD W/ 20 GPM FLOW CONTROL CONSERVES WATER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19-130SSVERTICAL DRENCH SHOWER, ALL STAINLESS STEEL, 1" NPT WATER SUPPLY ALL STAINLESS FOR HIGHLY CORROSIVE ENVIRONMENTS, STAY OPEN VALVES, SHOWER HEAD W/ 20 GPM FLOW CONTROL CONSERVES WATER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19-130AVERTICAL DRENCH SHOWER, STAINLESS STEEL SHOWER HEAD, GALVANIZED STEEL PIPE W/YELLOW POLYURETHANE PAINT, 1" NPT WATER SUPPLY HIGH VISABILITY YELLOW CORROSION RESISTANT PAINT, STAY OPEN VALVES, SHOWER HEAD W/ 20 GPM FLOW CONTROL CONSERVES WATER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19-130Vertical Mount shower head activates with 1" IPS chrome–plated brass stay–open ball valve and stainless steel triangular pull handle. Pipes and fittings are 1" galvanized steel protected with Bradtect™ yellow coating. 1" IPS female water supply. Unit includes a highly visible identification sign and inspection tag. Meets ANSI Z358.1–1998 requirements. SPECIFICATIONS5 lbs.1 unit10" Plastic Head

Manufacturer: Bradley, Manufacturer Part Number: S23-1060WALL MOUNT SHOWER, 18–GAUGE, TYPE 304 STAINLESS STEEL, PIVOTING SHOWERHEAD, 1/2" NPT CONNECTIONS, 2 GPM FLOW CONTROL, SINGLE USER 18–GAUGE, TYPE 304 STAINLESS STEEL, HINGE ACCESS PANEL, 2.0 GPM FLOW CONTROL SHOWERHEAD CONSERVES WATER, PREASSEMBLED FOR QUICK AND EASY INSTALLATION. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S23-1061WALL MOUNT SHOWER, 18–GAUGE, TYPE 304 STAINLESS STEEL, PIVOTING SHOWERHEAD, HAND HELD SHOWER SPRAY, 1/2" NPT CONNECTIONS, 2 GPM FLOW CONTROL, SINGLE USER, ADA COMPLIANT 18–GAUGE, TYPE 304 STAINLESS STEEL, HINGE ACCESS PANEL, 2.0 GPM FLOW CONTROL SHOWERHEAD CONSERVES WATER, HAND HELD SHOWER SPRAY, PREASSEMBLED FOR QUICK AND EASY INSTALLATION. ADA COMPLIANT. Kit: NO.

Manufacturer: Hughes, Manufacturer Part Number: SERVICE-CARD-HORobust and highly visible holder for storing the inspection record inserts. (Sold separately) Designed to offer easy removal and replacement of inspection records during semi-regular testing and maintenance of showers and eyewashes. Attach to the safety equipment or an adjacent wall / object using pre-molded holes for zip ties or fasteners. Regular servicing and testing of Emergency Safety Showers and Eye/Facewash units is critical to ensuring proper functionality in the event of an emergency. Depending on the location and company procedures you may test daily or weekly and carry out servicing every 3, 6 or 12 months. Each time the equipment is tested or serviced in accordance with the agreed schedule, the person responsible dates and signs the tag.SPECIFICATIONSMaterial Specifications: Plastic

Manufacturer: Bradley, Manufacturer Part Number: S19-430SHDrench Hose Spray Kit includes All Necessary Fittings And Hanger To install A Drench Hose On A Bradley Safety Shower.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G75GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open ABS plastic bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS75GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open ABS plastic bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G85GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS85GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5G45G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5G45G-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5GS45G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.