Forklift Accessories

Manufacturer: Vestil, Manufacturer Part Number: FRS-5-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FRS-6-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: SCRAPE-1Blade Width: 12", Overall Size (W x L x H): 13" x 36" x 8", Usable Fork Opening (W x H): 9–1/4" x 3–1/4" – Fork Truck Floor Scraper – Great new product designed to turn your fork truck into a floor scraper. Works well in paint and finish rooms for removing over sprayed paint from floors. Simply slide fork into opening and attach safety restraint to carriage for safety. Features hardened scraping blade for long life and durability. Blade is mounted in pivot assembly to allow it to raise up with contact against a crack or rise in the floor. Heavy–duty welded steel construction. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: FC-29Usable Size (W x H): 7–1/2" x 2–1/2", Casters: 3" to 1" Swivel, Capacity: 2000 lbs. – Fork Truck Fork Caddy – Transport fork truck forks easily and safely. This caddy allows the user to easily remove and install forks onto a fork truck. This is usually a dangerous and time consuming process, but our fork caddy makes this a breeze. After transporting the fork to the fork truck, rotate the handle 90°. Slide the fork onto the mast. The Fork Caddy has easy–grip handles and rolls smoothly on two swivel casters. A locking screw secures the fork into the caddy to keep it in place while transporting. The comfort–grip handle pivots up to 180° to allow for easier mobility. The Fork Caddy is lightweight and small enough for easy storage as well.

Manufacturer: Vestil, Manufacturer Part Number: SPB-P-72Unique design attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. The steel construction has a brightly colored baked-in powder-coated finish for added toughness and clear visibility. The attached sides contain the snow in a direct manner for time and safety efficiency. MFG Part# SPB-P-72

Manufacturer: Vestil, Manufacturer Part Number: FCB-818Overall Size: 8"W x 18"H – Forklift Carriage Bumper – Protect loads from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.

Manufacturer: Vestil, Manufacturer Part Number: FLB-D-10A Forklift Lifting Beam is the perfect asset for maneuvering and transferring heavy objects. The centrally located shackle between two fork pockets allow the user to safely attach to the unit and transport to the desired location. Hooks are also attached to the outside of the unit for a more secure lifting experience. The strong steel construction with a bright finish enables high visibility from both near and far. Secure to the fork truck by means of a long safety restraint and screw clamps. MFG Part# FLB-D-10

Manufacturer: Vestil, Manufacturer Part Number: SPC-3668-2LA stackable material cart provides the same great benefit of a standard material cart, while allowing multiple units to be stacked for a smaller warehouse footprint. A steel platform and structure enables a larger weight capacity of items to be maneuvered in a more efficient timeframe. A removable bar on each end of the cart gives the user the ability to have single or dual layers of product. The surface is smooth to diminish the chances of abrasion during the jostling, while rolling between areas on the included casters. The units are stacked together using a simple four corner post design for a more even weight distribution. MFG Part# SPC-3668-2L

Manufacturer: Vestil, Manufacturer Part Number: SP-HDL-LOCKOptional auto-lock feature - locks ladder in down position when weight added - foot operated release mechanism.

Manufacturer: Vestil, Manufacturer Part Number: SPB-N-WTOptional Weight for Fork Truck Snow Plow for better plowing performance.

Manufacturer: Vestil, Manufacturer Part Number: SPB-556Designed for use with your fork truck, this Snow Plow Blade is multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of rollplate with steel ribs on back. The blade edge is hardened steel.

Manufacturer: Vestil, Manufacturer Part Number: SPB-756Designed for use with your fork truck, this Snow Plow Blade is multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of rollplate with steel ribs on back. The blade edge is hardened steel.

Manufacturer: Vestil, Manufacturer Part Number: FORK-PThe steel fork lifter is designed to quickly and easily attach or remove forged steel forks from a carriage. The lifter features different hook points to balance a variety of fork lengths. Two tightening knobs are included to secure the fork to the lifter when being moved. Steel Construction. Tough baked in powder-coated yellow finish. MFG Part# FORK-P

Manufacturer: Vestil, Manufacturer Part Number: LTS-ETThe Optional smooth pivoting motion enables driver to turn seat thirty (3) degrees left or right of center position. The swivel system can be incorporated with air suspension system for total driver ergonomics.

Manufacturer: Vestil, Manufacturer Part Number: VGP-100Size (W x L): 17" x 30", Capacity: 1000 lbs., Wheel Size: 16", Handle Length: 37" – V–Groove Pipe Mover – Pipe and tubing measuring up to 20 feet long may now be easily moved by one person. The V–Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Large 16" diameter pneumatic tires will support loads that weigh up to 1,000 pounds. Includes a 37" long handle for added maneuverability. Steel construction. Unit is powder coated blue.

Manufacturer: Vestil, Manufacturer Part Number: VGP-100-FFTire Height (in.): 16, Handle Length (in.): 37, Uniform Static Capacity (pounds): 1,000, Wheel Style: Foam Filled, Tire Width (in.): 3–1/2, Construction : Steel, Finish : Powder Coat Blue – V–Groove Pipe Mover makes pipe and tubing measuring up to twenty (20) feet long easily moved by one (1) person. The V–Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Large tires will support heavy loads. Includes a handle for added maneuverability.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-120-PUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Pin Style, Maximum Fork Length (in.): 120, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-54-BKUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat black finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-54-R-EACHUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – This Round Fork Extension is ideal for moving around large rolls of material. Powder coat yellow fork. To install, insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than one–hundred and fifty (150) percent.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-BKUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat black finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-R-EACHUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – This Round Fork Extension is ideal for moving around large rolls of material. Powder coat yellow fork. To install, insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than one–hundred and fifty (150) percent.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-72-BKUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat black finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-84-BKUniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat black finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-90Uniform Capacity – Evenly Distributed Per Pair (pounds): 4,000, Fork Extension Inside Height (in.): 2, Fork Extension Inside Width (in.): 4–1/2, Mount Style: Loop Style, Accommodates Fork Width (in.): 4 – Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one–hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty–five (45) degree angle. Then, lay it down over the existing fork.