Pallet Trucks

Manufacturer: Vestil, Manufacturer Part Number: ALL-T-D8W-1400An eight wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight wheel unit provides added capacity to the unit by including two extra wheels to center of the dolly for a more solid foundation. MFG Part# ALL-T-D8W-1400

Manufacturer: Vestil, Manufacturer Part Number: BTC-WINCHHeight: 46" – Battery Transfer Cart – The optional winch attachment can be easily installed to either Battery Transfer Cart unit with the supplied hardware. The manual winch is designed to pull battery out of fork truck.

Manufacturer: Vestil, Manufacturer Part Number: BTC-CART-WINCHThe Battery Transfer Platform with Winch is designed to load, unload and transfer fork truck batteries with the use of a fork lift. Features a roller deck for easy battery movement. The front locking safety tabs secure battery in platform. Winch Attachment can be installed easily to the Battery Transfer Carts with the supplied hardware. The manual winch is designed to pull battery out of fork truck. The unit has a welded steel construction with a powder coat yellow finish and casters for portability. The cart rolls on glass filled nylon front rigid caster and back swivel casters. MFG Part# BTC-CART-WINCH

Manufacturer: Vestil, Manufacturer Part Number: BTC-CARTThe Battery Transfer Cart features a roller deck for easy battery movement. The front locking safety tabs secure battery in cart. The unit has a welded steel construction with a powder coat yellow finish and casters for portability. The cart rolls on Poly-On-Steel front rigid caster and Poly-On-Steel back swivel casters.

Manufacturer: Vestil, Manufacturer Part Number: P-CADDY-BK-CWNThe Crown Pallet Truck Caddy is an economical product that will convert a Crown manual hand pallet truck into a portable workstation in minutes. It has been designed with user efficiency and convenience in mind. It easily attaches to a Crown manual hand pallet truck with hardware included. The Caddy is manufactured from durable molded plastic for an attractive look. Features beverage holder, tool pockets, pen and pencil tray, and clipboard holder. The large storage compartment in back can also be used as a wastebasket. Installation hardware and instructions included. MFG Part# P-CADDY-BK-CWN

Manufacturer: Vestil, Manufacturer Part Number: CB-PMPS-PTDS-EOptional Power Traction Drive System has a combination throttle/direction. The Traction Drive System also features an auto reverse emergency inBellyin switch. MFG Part# CB-PMPS-PTDS-E

Manufacturer: Vestil, Manufacturer Part Number: CB-PMPS-10-50-DCCapacity: 1000 lbs., Fork Size (W x L): 4" x 36", Service Range: 3" to 50", Overall Height (Raised / Lowered) 91" to 73–1/2", Operation: DC Power – Counter–Balanced Pallet Master/Servers – Move pallets and skids from one workstation to another with this Counter–Balanced Stacker. Features an 18" horizontal load center and adjustable forks from 8" to 28". Standard 12V DC power lift with on–board charger. Move the unit around easily on its 8" x 3" phenolic casters. Push button pendant control on an 8 foot coil cord is standard.

Manufacturer: Vestil, Manufacturer Part Number: CB-PMPS-10-60-DCCapacity: 1000 lbs., Fork Size (W x L): 4" x 36", Service Range: 3" to 60", Overall Height (Raised / Lowered) 101" to 83–1/2", Operation: DC Power – Counter–Balanced Pallet Master/Servers – Move pallets and skids from one workstation to another with this Counter–Balanced Stacker. Features an 18" horizontal load center and adjustable forks from 8" to 28". Standard 12V DC power lift with on–board charger. Move the unit around easily on its 8" x 3" phenolic casters. Push button pendant control on an 8 foot coil cord is standard.

Manufacturer: Vestil, Manufacturer Part Number: CB-PMPS-6-50-DCCapacity: 600 lbs., Fork Size (W x L): 4" x 36", Service Range: 3" to 50", Overall Height (Raised / Lowered) 91" to 73–1/2", Operation: DC Power – Counter–Balanced Pallet Master/Servers – Move pallets and skids from one workstation to another with this Counter–Balanced Stacker. Features an 18" horizontal load center and adjustable forks from 8" to 28". Standard 12V DC power lift with on–board charger. Move the unit around easily on its 8" x 3" phenolic casters. Push button pendant control on an 8 foot coil cord is standard.

Manufacturer: Vestil, Manufacturer Part Number: CB-PMPS-6-60-DCCapacity: 600 lbs., Fork Size (W x L): 4" x 36", Service Range: 3" to 60", Overall Height (Raised / Lowered) 101" to 83–1/2", Operation: DC Power – Counter–Balanced Pallet Master/Servers – Move pallets and skids from one workstation to another with this Counter–Balanced Stacker. Features an 18" horizontal load center and adjustable forks from 8" to 28". Standard 12V DC power lift with on–board charger. Move the unit around easily on its 8" x 3" phenolic casters. Push button pendant control on an 8 foot coil cord is standard.

Manufacturer: Vestil, Manufacturer Part Number: P-CADDY-CWNThe Crown Pallet Truck Caddy is an economical product that will convert a Crown manual hand pallet truck into a portable workstation in minutes. It has been designed with user efficiency and convenience in mind. It easily attaches to a Crown manual hand pallet truck with hardware included. The Caddy is manufactured from durable molded plastic for an attractive look. Features beverage holder, tool pockets, pen and pencil tray, and clipboard holder. The large storage compartment in back can also be used as a wastebasket. Installation hardware and instructions included. MFG Part# P-CADDY-CWN

Manufacturer: Vestil, Manufacturer Part Number: EPT-2748-30Compact body design and light service weight for use in tight areas and low-duty applications. Multi-function handle with emergency reverse, battery indicator, raise/lower buttons, horn and forward/reverse butterfly switch. Long handle to reduce slouching, returns to vertical position automatically when released. Interchangeable long life battery pack for continuous use. Fork Size: 27" x 48". Capacity: 3,000 lbs.

Manufacturer: Vestil, Manufacturer Part Number: PM5-2748-PA-Y The Ergonomic Power Assist Pallet Truck is for anyone who has operated a fully loaded pallet truck and knows the most strenuous part is getting the wheels to start rolling. Pumping the handle of the pallet truck serves two purposes. First, it serves the traditional purpose of lifting the forks. Secondly, the travel direction is selected. By squeezing the hand-grip and pumping the handle, the truck will move in a reverse direction. When the hand-grip is in the downward position, raising the handle will propel the truck to move in a forward direction (direction of the forks), thus reducing the pushing/pulling force. Steel Ergonomic Power Assist Pallet Truck, 48 In. x 27 In. x 48 In., 5000 Lb. Capacity, Yellow Uniform Capacity (lb.): 5000Overall Fork Width (in.): 27

Manufacturer: Vestil, Manufacturer Part Number: ALL-T-2-GPTCapacity: 2,000 lbs. (Capacity at an 18" Load Center), Adjustable Fork Width: 8" to 36", Fork: 4"W x 36"L, Service Range: 2–5/8" to 12", Overall Size: 79"W x 68"L – Gas–Powered All–Terrain Pallet Truck – All terrain pallet truck with gas–powered traction drive system. Great for moving heavy loads over rough terrain. Powered by a Briggs & Stratton 6HP gas–powered engine for both the power traction drive and fork lift/lower. Handle with forward reverse speed control and dead man safety switch. Hydrostatic transmission with hand–operated forward and reverse selection. Powered fork raise and lower controlled with independent levers. Usable width between outriggers is 50". Pneumatic steer wheels are 13" diameter x 4" wide each. The drive wheels are 18" diameter x 8" wide each. Wheels include sealed bearings for outdoor use. Steering arc is 150°.

Manufacturer: Vestil, Manufacturer Part Number: ALL-T-4-GPT An all-terrain pallet truck with a gas powered drive system is the perfect solution when moving items over uneven surfaces. This pallet truck is great for use at construction sites and landscaping areas. With the use of a tilting fork feature, the products can be positioned to better fit the users' needs. The robust steel construction and wide set outriggers enable the transference of items, both large and small. Steering handle includes multiple controls for user safety. PT units have Powered Tilt. Electric start Adjustable fork width Gas powered for consistent daily use Foam filled tires for added support Liquid painted finish Complies with ASME B56.1-2004 Capacity: 4,000 lbs. (Capacity at an 18" Load Center), Adjustable Fork Width: 8" to 36", Fork: 4"W x 36"L, Service Range: 2–5/8" to 12", Overall Size: 79"W x 68"L – Gas–Powered All–Terrain Pallet Truck – All terrain pallet truck with gas–powered traction drive system. Great for moving heavy loads over rough terrain. Powered by a Briggs & Stratton 6HP gas–powered engine for both the power traction drive and fork lift/lower. Handle with forward reverse speed control and dead man safety switch. Hydrostatic transmission with hand–operated forward and reverse selection. Powered fork raise and lower controlled with independent levers. Usable width between outriggers is 50". Pneumatic steer wheels are 13" diameter x 4" wide each. The drive wheels are 18" diameter x 8" wide each. Wheels include sealed bearings for outdoor use. Steering arc is 150°.    

Manufacturer: Wesco, Manufacturer Part Number: 272754HIGH LIFT – LOW PRICE! Wesco® High Lift Pallet Trucks correctly position skids and work surfaces to minimize back strain. Features moldon polyurethane wheels, 180° steering arc, and loop handles with inside hand control. Ideal for all your loading and unloading operations. Load capacity of 2,200 lbs. Raise/Lower to any height – 31–1/2" off the floor SPECIFICATIONS275 lbs.1 truck w/polyurethane wheels27" W x 44.5" L Fork Size

Manufacturer: Vestil, Manufacturer Part Number: HIPM-2772-ACThe High Rise Lift Truck increases employee ergonomics and machine efficiency and productivity. It reduces muscle fatigue and body injuries by bringing material closer to actual worker height. AC Powered. MFG Part# HIPM-2772-AC

Manufacturer: Vestil, Manufacturer Part Number: HIPM-2772-DCThe High Rise Lift Truck increases employee ergonomics and machine efficiency and productivity. It reduces muscle fatigue and body injuries by bringing material closer to actual worker height. DC Powered. MFG Part# HIPM-2772-DC

Manufacturer: Vestil, Manufacturer Part Number: HYDRA-HHydra Carts Option – Hand Crank Winch & Hook Operation.

Manufacturer: Vestil, Manufacturer Part Number: HYDRA-AF-18Hydra Carts Option – 3"W x 18"L Long Forks.

Manufacturer: Valley Craft, Manufacturer Part Number: F84797A6EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Shoes measure 11.5". Truck rolls easily on molded–on solid tires. 1000–lb. capacity.SPECIFICATIONS26" x 22" x 54" - 57 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F84725A3EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Shoes measure 11.5". Truck rolls easily on fully pneumatic tires. 1000–lb. capacity.SPECIFICATIONS26" x 25" x 54" - 60 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F84876A0EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Equipped with hand brakes for added safety. Shoes measures 11.5". Truck rolls easily on fully pneumatic tires. 1000–lb. capacity.SPECIFICATIONS28" x 25" x 54" - 64 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F84745A9EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Shoes measures 11.5". Truck rolls easily on replaceable solid tires. 1000–lb. capacity.SPECIFICATIONS26" x 22" x 54" - 60 lbs.