125,000-lbs Capacity Trailer Stabilizing Ratchet Jack
Vestil 125,000-lbs Capacity Trailer Stabilizing Ratchet Jack $395.75
Manufacturer: Vestil, Manufacturer Part Number: LO-J-125Uniform Static Capacity (lbs.): 125000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
ALUMINUM DRIVER BEWARE INSTRUCTION SIGN - Model SAJ-1012
Vestil ALUMINUM DRIVER BEWARE INSTRUCTION SIGN - Model SAJ-1012 $23.99
Manufacturer: Vestil, Manufacturer Part Number: SAJ-1012Optional Aluminum Drivers Beware Instruction Sign for the trailer stabilizing jacks.
Beam Jack - Ratchet Type 50,000 lbs. Lifting Capacity
Vestil Beam Jack - Ratchet Type 50,000 lbs. Lifting Capacity $493.66
Manufacturer: Vestil, Manufacturer Part Number: LO-J-BEAM-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 39.5" - 180 lbs.
Big Foot Stabilizing Jack 40,000 lbs. Lifting Capacity
Vestil Big Foot Stabilizing Jack 40,000 lbs. Lifting Capacity $501.11
Manufacturer: Vestil, Manufacturer Part Number: BFSJ-2748Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night. SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 40,000 lbs. Lifting Capacity35.375" x 48" x 39.5" - 125 lbs.
Big Foot Stabilizing Jack 50,000 lbs. Lifting Capacity
Vestil Big Foot Stabilizing Jack 50,000 lbs. Lifting Capacity $553.97
Manufacturer: Vestil, Manufacturer Part Number: BFSJ-2748-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night. SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity35.375" x 48" x 39.5" - 125 lbs.
ECONOMY FLAT BASE STABILIZING JACK 5K - Model SJ-40
Vestil ECONOMY FLAT BASE STABILIZING JACK 5K - Model SJ-40 $160.54
Manufacturer: Vestil, Manufacturer Part Number: SJ-40Trailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush-type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.
Stabilizing Jack, Economy Model ECONOMY ROUND BASE STABILIZING JACK 5K
Vestil ECONOMY ROUND BASE STABILIZING JACK 5K $141.63
Manufacturer: Vestil, Manufacturer Part Number: SJ-35Trailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.
Economy Stabilizing Jack - Two Handles
Vestil Economy Stabilizing Jack - Two Handles $148.25
Manufacturer: Vestil, Manufacturer Part Number: SJ-35-2HJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 44" to 51"50,000 lbs Static Capacity, 5,000 lbs Lifting Capacity16" x 16" x 44" - 43 lbs.
MECHANICAL MACHINERY JACK W/ 1.5 TON CAP
Vestil MECHANICAL MACHINERY JACK W/ 1.5 TON CAP $218.14
Manufacturer: Vestil, Manufacturer Part Number: MMJ-3The Mechanical Machinery Jack is good for repairing vehicles, lifting trucks, railway maintenance, construction, mining, and agriculture. Compact design with collapsible lever offers easy operation and simple maintenance. A self locking, anti-kickback operating lever reduces injuries. Standard features include: folding handle, two carrying handles and a large base plate. Lifting and lowering speed is controllable. No seals to leak. Will not drift down even after an extended period of time. MFG Part# MMJ-3
MECHANICAL MACHINERY JACK W/ 3 TON CAP
Vestil MECHANICAL MACHINERY JACK W/ 3 TON CAP $238.88
Manufacturer: Vestil, Manufacturer Part Number: MMJ-6The Mechanical Machinery Jack is good for repairing vehicles, lifting trucks, railway maintenance, construction, mining, and agriculture. Compact design with collapsible lever offers easy operation and simple maintenance. A self locking, anti-kickback operating lever reduces injuries. Standard features include: folding handle, two carrying handles and a large base plate. Lifting and lowering speed is controllable. No seals to leak. Will not drift down even after an extended period of time. MFG Part# MMJ-3
MECHANICAL MACHINERY JACK W/ 5 TON CAP
Vestil MECHANICAL MACHINERY JACK W/ 5 TON CAP $301.70
Manufacturer: Vestil, Manufacturer Part Number: MMJ-10The Mechanical Machinery Jack is good for repairing vehicles, lifting trucks, railway maintenance, construction, mining, and agriculture. Compact design with collapsible lever offers easy operation and simple maintenance. A self locking, anti-kickback operating lever reduces injuries. Standard features include: folding handle, two carrying handles and a large base plate. Lifting and lowering speed is controllable. No seals to leak. Will not drift down even after an extended period of time. MFG Part# MMJ-10
MECHANICAL SCREW JACK 10000 LB CAP
Vestil MECHANICAL SCREW JACK 10000 LB CAP $87.36
Manufacturer: Vestil, Manufacturer Part Number: MSJ-5The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-3
MECHANICAL SCREW JACK 20000 LB CAP
Vestil MECHANICAL SCREW JACK 20000 LB CAP $99.01
Manufacturer: Vestil, Manufacturer Part Number: MSJ-10The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-10
MECHANICAL SCREW JACK 40000 LB CAP
Vestil MECHANICAL SCREW JACK 40000 LB CAP $155.75
Manufacturer: Vestil, Manufacturer Part Number: MSJ-20The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-10
MECHANICAL SCREW JACK 6000 LB CAP
Vestil MECHANICAL SCREW JACK 6000 LB CAP $72.73
Manufacturer: Vestil, Manufacturer Part Number: MSJ-3The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-3
OPTIONAL RATCHET HANDLE FOR CJ BEAM
Vestil OPTIONAL RATCHET HANDLE FOR CJ BEAM $185.24
Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-RHDLThe optional ratchet handle is a great addition to the beam jacks. A smooth finish provides easy handling when in use. The lightweight and compact design provides simple storage when not in use. MFG Part# CJ-BEAM-RHDL
Stabilizing Jack
Vestil Stabilizing Jack $389.33
Manufacturer: Vestil, Manufacturer Part Number: HI-J-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 45" to 57"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 45" - 133 lbs.
Stabilizing Jack - Ratchet Model, 10
Vestil Stabilizing Jack - Ratchet Model, 10" Hard Rubber Wheels , 41"... $300.81
Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-RJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 41" to 50"100,000 lbs Static Capacity, 40,000 lbs. Lifting Capacity20.563" x 14" x 41" - 115 lbs.
Trailer Stabilizing Jack - Hand Crank w/ Pneumatic Wheels STABILIZING JACK PNEUMATIC WHEELS 50 K
Vestil STABILIZING JACK PNEUMATIC WHEELS 50 K $732.32
Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-PNTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.
Trailer Stabilizing Jack - Hand Crank w/ Semi-Pneumatic Wheels STABILIZING JACK SOLID FOAM WHEELS 50K
Vestil STABILIZING JACK SOLID FOAM WHEELS 50K $752.41
Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-SNTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.
Stabilizing Jack, Economy Model, 8
Vestil Stabilizing Jack, Economy Model, 8" Hard Rubber Wheels $203.86
Manufacturer: Vestil, Manufacturer Part Number: SJ-35-EFJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 41" to 57.5"50,000 lbs Static Capacity, 5,000 lbs Lifting Capacity16" x 16" x 43" - 60 lbs.
Stabilizing Jack, Ratchet Model, 10
Vestil Stabilizing Jack, Ratchet Model, 10" Hard Rubber Wheels, 45" -... $335.27
Manufacturer: Vestil, Manufacturer Part Number: HI-JJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 45" to 57"100,000 lbs Static Capacity, 40,000 lbs. Lifting Capacity27.625" x 24" x 45" - 115 lbs.
Stabilizing Jack, Spin Top Model STABILIZING SPIN TOP JACK 40,000 CAP
Vestil STABILIZING SPIN TOP JACK 40,000 CAP $280.37
Manufacturer: Vestil, Manufacturer Part Number: SP-TOPTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.
Beam Jack - Ratchet Type 40,000 lbs. Lifting Capacity TRAIL STABILIZING RATCHET BEAM JACK 40K
Vestil TRAIL STABILIZING RATCHET BEAM JACK 40K $419.07
Manufacturer: Vestil, Manufacturer Part Number: LO-J-BEAMThe Trailer Stabilizing Jack is used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush-type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
Trailer Stabilizing Jack
Vestil Trailer Stabilizing Jack $353.84
Manufacturer: Vestil, Manufacturer Part Number: LO-J-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 39.5" - 128 lbs.
Trailer Stabilizing Jack - Hydraulic Beam
Vestil Trailer Stabilizing Jack - Hydraulic Beam $492.66
Manufacturer: Vestil, Manufacturer Part Number: H-LO-J-BEAMStatic Capacity: 100,000 lbs., Lifting Capacity: 40,000 lbs. Service Range: 41" to 47", Wheel Size &Type: 10" hard rubber/3" steel – Trailer Stabilizing Jack – Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating.
Trailer Stabilizing Ratchet Beam Jack w/ 40,000-lbs Lifting Capacity
Vestil Trailer Stabilizing Ratchet Beam Jack w/ 40,000-lbs Lifting Ca... $436.74
Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-BEAMUniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 40,000, Service Range Minimum (in.): 39–1/2, Service Range Max (in.): 51, Wheel Width (in.): 10, Wheel Diameter (in.): 2, Small Front Steel Wheel Diameter (in.): 3, Wheel Type: Hard Rubber – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
Trailer Stabilizing Ratchet Beam Jack w/ 50,000-lbs Lifting Capacity
Vestil Trailer Stabilizing Ratchet Beam Jack w/ 50,000-lbs Lifting Ca... $600.91
Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-BEAM-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 40, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
Stabilizing Jack - Ratchet Jack Model, 10 TRAILER STABILIZING RATCHET JACK 40K
Vestil TRAILER STABILIZING RATCHET JACK 40K $291.52
Manufacturer: Vestil, Manufacturer Part Number: LO-JThe Trailer Stabilizing Jack is used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush-type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
Trailer Stabilizing Ratchet Jack w/ 50,000-lbs Lifting Capacity
Vestil Trailer Stabilizing Ratchet Jack w/ 50,000-lbs Lifting Capacity $351.15
Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-R-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
Trailer Stabilizing Spin Top Jack
Vestil Trailer Stabilizing Spin Top Jack $335.21
Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39–1/2, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa