Forklift Accessories

Manufacturer: Vestil, Manufacturer Part Number: VSWP-60Overall Size: 60"W x 9"D x 12"H, Fork Pocket: 5"W x 7"D x 2"H, Sweeping Width: 60", Bristle Length: 8" – Fork Truck Mounted Brush Sweeper – The rugged lightweight Fork Truck Broom is ideal for interior and exterior commercial sweeping. Great for all cleanup applications; docks, warehouses, and parking lots. Lightweight aluminum body with polypropylene bristles (replaceable). Red powder coat finish. Fork pockets measure 7" deep x 5" wide x 2" high. Unit attaches to forks by sliding forks into fork pockets and securing with locking screws.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 63" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 63" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-63Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 63" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-RAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 63", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63-RAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 63", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-TAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 63", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63-TAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 63", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 63", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63-PAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 63", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-63-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 63", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-72Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 72" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-72-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-72-PAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-72-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-84-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 84", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-84-PMaximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 84", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-96Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 96" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-96Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 96" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-96Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 96" Length.