Forklift Accessories

Manufacturer: Vestil, Manufacturer Part Number: FE-4-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FORK-R-54Overall Size: 40"W x 46"D x 54"H, Minimum Fork Length: 60" – Fork Extension Storage Rack – Install or remove fork extensions without lifting, pushing or getting off the fork truck. Easy to use: A) Drive in so tips of forks are over elevated bar. B) Lower forks until fork nests in channel in base of rack. C) Back fork truck out of fork retraining straps. Forks not included.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-72Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Steel retaining strap prevents fork extensions from sliding off forks during use. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-4-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-5-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-5-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-6-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-6-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-5-72Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-7-108-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-108-P

Manufacturer: Vestil, Manufacturer Part Number: FE-8-108-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-8-108-P

Manufacturer: Vestil, Manufacturer Part Number: FE-4-108-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-108-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-108-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-7-120-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-108-P

Manufacturer: Vestil, Manufacturer Part Number: FE-8-120-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-8-108-P

Manufacturer: Vestil, Manufacturer Part Number: FE-7-48-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-8-48-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-8-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-7-54-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-8-54-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-8-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-7-63-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-8-63-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-8-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-4-66-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-66-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.